Home Tech A Layman’s Guide To Replacing Aircon Parts

A Layman’s Guide To Replacing Aircon Parts

0
A Layman’s Guide To Replacing Aircon Parts

So your aircon’s not working as well as it used to, and you want to try and replace some parts yourself before calling in the professionals. This guide will take you through the basics of replacing the most common aircon parts. Let’s get started!

Replacing The Air Filter

The air filter is one of the most important parts of your air conditioner, as it helps to remove dust, pollen, and other airborne particles from the air. A dirty air filter can cause your air conditioner to work harder than necessary and can also lead to poor indoor air quality. Replacing your aircon filter is probably the easiest of these three tasks. Most filters can be accessed by removing a grille or panel on the front of your unit. Once you’ve found the filter, note which way it is oriented before removing it ( typically with arrows indicating airflow direction ) so that you can put the new one in correctly.

It’s a good idea to vacuum or dust around the area where the filter sits before putting the new one in to ensure good airflow.

Replacing The Evaporator Coil

The evaporator coil is responsible for absorbing heat from the indoor air. Over time, the evaporator coil can become dirty or damaged, which can cause it to lose its ability to absorb heat effectively. If your evaporator coil needs to be replaced, it is best to booking appointment with Socool Aircon do it, as it is a delicate process.

Replacing The Condenser Coil

The condenser coil is responsible for releasing heat from the refrigerant. Like the evaporator coil, the condenser coil can become dirty or damaged over time, which can reduce its efficiency. If your condenser coil needs to be replaced, you should also have a professional do it.

Replacing The Compressor

The compressor is one of the most expensive parts of your air conditioner, so replacing it can be a significant expense. The compressor is responsible for circulating the refrigerant through the system. If it fails, it will need to be replaced.

Replacing The Ductwork

If your ductwork is old or damaged, it can cause your air conditioner to work harder than necessary and can also lead to poor indoor air quality. Replacing your ductwork is a big job, so you will likely need to hire a professional to do it for you.

Replacing Your Capacitor

Replacing your capacitor is a little more complicated. First, you’ll need to purchase a new capacitor that matches the specifications of your old one. Be sure to write down or take a picture of the old capacitor so that you know what to look for. Once you have the new capacitor, you’ll need to discharge any residual electricity in your system by shorting out the wires leading to your old capacitor ( use gloves and take care not to shock yourself! ). Then, remove the old capacitor and connect the wires leading to the new one, being sure to connect them to the correct terminals.

Read here for more details https://www.socool.sg/part-replacement/.

Replacing Fan Blade

Finally, we have come to replace your fan blade. Like with replacing your filter, start by locating where your blade is situated within your unit. Typically, there will be a few screws holding it in place; remove these screws and carefully set the blade aside. Line up your new blade with the shaft in your aircon unit, making sure that it is pointing in the same direction as the old blade, and screw it into place. That’s it – you’re all done!

The air filter is one of the most important parts of your air conditioner, as it helps to remove dust, pollen, and other airborne particles from the air. A dirty air filter can cause your air conditioner to work harder than necessary and can also lead to poor indoor air quality. Replacing your aircon filter is probably the easiest of these three tasks. Most filters can be accessed by removing a grille or panel on the front of your unit. Once you’ve found the filter, note which way it is oriented before removing it ( typically with arrows indicating airflow direction ) so that you can put the new one in correctly.