Cities are lit with the help of street lights, traffic lights, billboards and more. However, these systems require continuous maintenance as well as power cables that run beneath the city’s roads. There is now a trend towards wireless lighting which can be used to replace current systems without requiring too much effort. Wireless technology is based on radio-frequency communication.
Lighting can be controlled by switches or sensors; it can also be automated using timers and dimmers (which control how ‘bright’ the light appears) to make sure that they do not use excess energy when it’s not required or needlessly keep them lit throughout the day and night.
People are already familiar with devices like remote controls which are used to control electronic equipment or appliances located at some distance. The primary function of these remotes is to provide means for human-to-device interaction where people use them to set preferences, change settings, switch on/off, etc. With the advent of technologies like Bluetooth and WIFI that allow devices to connect with each other from a short distance, the available avenues for controlling electronic equipment have expanded significantly.
Basically this technology allows a device in proximity to control another device in its vicinity. For example a mobile phone located in a room can remotely turn on/off lights, change TV channel or set preferences of any device connected with it through the Internet. Similarly you can use your smart watch to control devices installed in your house without going anywhere near them just by using applications on your phone.
Use of LED
LED light bulbs are the new technology trends in the lighting industry which can’t be avoided today. LED lighting fixtures have numerous benefits from environmental health to your own health. These lights are energy-efficient and they consume less electricity which eventually results in the reduction of energy bills.
But before you buy them, there are some things you need to know, especially if it is your first time to purchase this kind of bulb. There are some helpful buying tips below so that you won’t make any mistake when choosing an LED light fixture for your house or office:
Choosing a color temperature
The color temperature describes how warm or cold a light appears and has nothing to do with its actual warmth (i.e., how much heat it produces). For example, a light’s temperature of 3000K will appear warmer than one with a 5000K temperature.
Choosing the lumens you need
Lumen is the measurement of total brightness of a specific area or object. So basically you have to consider how much light your place needs, whether it is for an office, living room or kitchen. Once you’ve determined that and then choose LED bulbs depending on lumen output.
Understanding lamp life expectancy
A good LED bulb should last more than 20 years or 25000 hours. If it exceeds this lifespan then you are definitely getting your money’s worth since it means less expense in changing them out every now and then.
Drawing comparisons between CRI and color temperature
CRI is the color rendering index, which is the quality of light that determines how colors appear when illuminated by a particular lamp. If it has a high CRI then you will be able to see the object as it truly is, but if it’s low, colors can look distorted and will make objects almost unrecognizable.
Choosing fixed LED bulbs and those with adjustable brightness
This depends on your situation. If your place normally requires a certain level of brightness throughout a day or year then fixed lighting fixtures are best for you. But if changes in illumination are necessary, either because of changing seasons or activities, then adjustable LEDs are perfect for this.
Understanding warranty coverage
The best-LEDs come with one year warranty at least so that you won’t have to worry about any defect on your fixture during this period. Plus, most of them offer extra protection for the price you pay so it is best to go with those who offer more warranty coverage if possible.
Remember not to look just at the price tag
There are cheap LED lights that may seem like a good buy but sometimes they can be faulty or burn out quickly. You really need to do some research first and know the brand and company selling the bulbs before you purchase them. If you see a bulb sold at a super affordable price then think twice because it might cost more in time when you have to change it right away or make a trip back the store where you purchased them from.
Evolution of devices
The advent of these technologies has led to the evolution of devices like smart TVs and air conditioners. They are gaining ground in terms of market popularity because they offer enhanced experience by allowing people to control them through their mobiles or computers. For example, you can set your air conditioner before leaving for work to turn on at a specific time (say if you are not able to plan your day well), monitor the status remotely, change settings, etc. Similarly smart TVs allow you use voice commands or mobile apps to perform tasks that typically used remotes for thus eliminating any chances of human errors while using mobiles/ remotes which may result in injury or damage if something goes wrong. Some TVs even have an option where you can monitor your baby at home through internet and use voice commands to play songs, turn on lights, etc.
Role of connectivity
As we can see connectivity is playing a vital role in making our lives easier by allowing us to control devices even from remote locations through various means like smart watches, mobile apps or voice commands. With the advent of wearable technology this trend is likely to gain momentum with diverse set of applications in future for example you don’t have to get up every time when you want to drink a glass of water because all you need is a smart watch on your hand which will allow you to activate your coffee maker while sitting comfortably on the couch. Thus improving ergonomics while lifting human interaction off cumbersome tasks that require going out or getting up from somewhere.
Advantages of wireless lightning
There are many advantages to wireless lighting:
- The system requires very little maintenance due to a lack of cabling.
- The system is much cheaper to set up.
- No power cabling means that roads are less cluttered and it is easier to install lighting in remote areas where power cables are impractical.
- It’s possible to use light sensitive detectors which can make sure street lights aren’t used during the day or when there are no cars on the road, saving energy costs for most organizations.
Disadvantages of wireless lighting include:
- Interference from other radio sources such as mobile phones may cause flickering of lights, but this problem is likely to decrease over time as more wireless lighting installations take place.
As the world is getting interconnected day by day, it is becoming more evident that connectivity plays a crucial role in every sphere of life. This trend has permeated into our homes through devices like smart TVs and smart air conditioners. Every device connected to the Internet becomes an enabler for home automation because it can be connected with other devices to perform tasks.
Frequently Asked Questions
- Is this advance technology is really useful?
Yes, the advance technology is really useful and helpful in our daily lives. We get comfort by this new technology.
- Is there any harmful effect of lightning technology?
No, the advance and modern technology only give us comfort. Day by day technology is becoming advance and this is the way toward modern life.