Remember when to view a movie with the help of a DVD Player, you needed to visit an online rental store to rent the movie you wanted to view or buy those films on sale at $4.99? Now, those times are gone.
In those times, you built up an extensive collection of Blue-Rays and DVDs that contain your favorite TV shows, which are now in your storage. Then you feel nostalgic, and you can recall all of the limited collection of collector’s edition DVDs you own. You’d like to play the sets but are unsure if your Smart TV is compatible with the older DVD player. This post will teach you ways to link a DVD player to a smart TV so you can view your entire DVD collection.
Make sure your DVD player has a video connection.
Before you do anything, be sure you check your DVD player to know the video connections it is equipped with. If you purchased the DVD player not long ago, it likely comes with the HDMI output. Connect the other end from an HDMI cable with the rear of the DVD player.
- The other end on the HDMI cable connects it to the connection on the TV.
- To view the DVD player’s content, turn it on and select the appropriate input on your TV.
If you don’t own an optical disc player and are looking to buy one, make sure you purchase one that has an HDMI output for video so that you can directly connect it to your television. If you’re still using an older DVD player, however, it’s not equipped with an HDMI input for your video signal, make sure you check the back of the player to determine what kind of connection it comes with.
Ensure that your Smart TV has composite and component video inputs
There is usually a video connector integrated into 65″ smart TVs. Suppose this is the case on the television’s rear. In that case, you’ll find an orange RCA connector representing analog audio signal sometimes. Instead of the RCA connectors for audio connection, you can use a jack a stereo 3.5mm audio connector.
How can you connect your smart TV if it doesn’t have a composite or component video input?
As time passes, the TV makers cut out analog video connections. This is because the resolution of the video is increasing to 8k and 4k and beyond. There’s no sense in reducing the quality of the video experience using analog signals like composite and components, which will only produce low-quality videos. Your smart TV is the best option if you have DVDs and play the film on your large screen.
You will require to convert your analog video signal into digital is the converter or Component HDMI Convertor (links on Amazon). If your device is equipped with both kinds of connections, I would recommend using an adapter for the components to the HDMI converter as it can output the 1080p HD video signal. The video format of the composite can provide a resolution of 704×480 (480i). It requires an explanation of 1920×1080 (1080p) for a good video experience when watching Smart TV. The converter will increase the resolution to 1080p, so the video quality appears better.
In contrast to composite video cables, which only use one channel of connectors or cables to convey a video signal, component video cables use numerous channels. Green, blue, and red wires are the three that are utilized for video transmission. Either purchase a component video cable with only these three wires or get one with 5 RCA components, including the red and white lines for the two audio connectors.
You can choose from resolutions of 480p, 576p, 720p, and 1080p using component video connections. This is why it is suggested to utilize composite over component since the converter will work better when scaling an image. This results in a higher-quality video. Be aware that even if you obtain an upscaled 1080p video signal through your converter software, the video quality could not be the highest and shouldn’t be compared to the current HD formats. This is because what is considered to be the standard definition of DVDs are 720×480 for NTSC and 720×576 pixels when it comes to PAL in 4:3 or 16-:9 aspect ratio.
Lastly, you should be aware that one-way converters are what you are using. This means they can be converted between analog and digital, but not reverse. Using a component-to-HDMI converter, connect your DVD player to your Smart TV.
- Connect the composite or component audio cables and video cable (white or the red version of Audio cables (RCA and white) to the DVD’s back.
- Use the opposite side from the line totaling 5cables, and plug them into the converter’s correct position for the video.
- Install the converter box on your TV and connect the HDMI cable.
- An electrical outlet must be connected to the converter, and it must be turned on. In some instances, the converter we’ve recommended in this article does not come with an adapter to power; however, it comes with a USB cable that powers it. If your television has a USB port that supplies power, it can be connected to it, but if you don’t, utilize a used 5VDC power adapter from an old cellphone.
- The DVD player should be turned on and then use the TV’s remote to select the appropriate input channel.
- At this moment, you’ll be able to see the logo of the DVD displayed on screen your TV.
The simple steps outlined in this article will assist you in connecting your DVD player, Xbox 360, PS2, or any other old device you own with Your Smart TV. Make sure you keep all of the cables you require available.